The requirements in industrial image processing impose great demands of the optics, not only to the optical performance of the lenses used, but also to their mechanical design. High vibration stability is one of the requests which is not fulfilled very often by conventional C-Mount lenses available on the market because of their light construction. In addition, the lenses need to be small in size and should have a locking mechanism for both iris and focus.
 
Optique Schneider pour la vision industrielle C-Mount Lenses IR 400-1000nm
The 2/3" C-Mount lenses are designed for a spectral range of 400-1000 nm and can be used in the visible and near infrared range, practically without focus difference. The high optical performance is achieved by a sophisticated optical design and the use of ultra low dispersion glass. A special broadband coating reduces stray light and increases transmission over the whole spectral range. The lenses are available with manual, motorized or video signal controlled iris, which makes them suitable for video surveillance as well as for technical applications.
Optique Schneider pour la vision industrielle C-Mount Lenses Compact Series IR 400-1000nm
The 2/3" C-Mount lenses are optically and mechanically designed for the special needs of industrial imaging. The lenses are corrected for a spectral range of 400-1000 nm and can be used over the complete spectral sensitivity range of common CCD sensors without noticable focus difference. The excellent optical performance - even with short object distances - corresponds perfectly to the capabilities of high resolution sensors. The robust mechanical design with lockable focus and iris setting mechanism guarantees a long-term stability even in typical industrial environment.

objectif haute resolution

C-Mount Lenses 1" and 2/3" Standard
C-mount lenses of our standard series can be used for sensor sizes up to 2/3", some of them even up to 1" format. Two of the lenses have a very high relative aperture of 0.95 which results in excellent image quality even under low illumination conditions. Besides the fixed focal length lenses, two zoom lenses are available – one of them also in motorized version. The 2/3" C-Mount lenses are optically and mechanically designed for the special needs of industrial imaging. The lenses are corrected for a spectral range of 400-1000 nm and can be used over the complete spectral sensitivity range of common CCD sensors without noticable focus difference. The excellent optical performance - even with short object distances - corresponds perfectly to the capabilities of high resolution sensors.

 

 C-Mount Lenses 1/3" 3-CCD
The two lenses of the 3-CCD series are designed for 3-CCD color cameras with a maximum sensor size of 1/3". The special lens design considers the color beam splitter and the small depth of insertion of such cameras.

C-Mount Lenses IR 400-1000nm offer:
- Spectral sensitivity optimized for CCD cameras
- Usability in both visible and infrared range(400-1000nm), practically without focus difference
- Higher sensitivity obtained because of greater spectral bandwidth
(especially with artificial light approx. 1.5f/stops)
- Super broadband coating and thereby reduced stray light and increased transmission
- Reduced color aberrations due to use of ultra-low dispersion glass
- Minimal geometric distortion
- Improved illumination distribution
- Increased modulation
C-mount Lenses IR.pdf (104 ko)

Optique Fujinon pour la vision industrielle
Lens model 2/3"
Cinegon
1,8/4,8
Cinegon
1,4/8
Cinegon
1,4/12
Xenoplan
1,4/17
Xenoplan
1,4/23
Xenoplan
1,9/35
Tele-Xenar
2,2/70
Angle of view
- horizontal
- vertical
- diagonal
v
91
71
105
v
55
42
67
v
38
29
48
v
28
21
35
v
22
16
27
v
14
11
18
v
7,2
5,4
8,9
MOD in mm
1
5
20
70
115
310
1250

Object dimensions
(W x H) mm
- MOD
- 1 m
- 5 m

v
v
24x18
1650x1240
8610x6460
v
v
18x14
1000x750
5200x3900
v
v
28x21
670x500
3470x2600
v
v
39x29
480x360
2480x1860
v
v
50x37
370x280
1940x1450
v
v
77x58
250x190
1260x940
v
v
154x116
-
620x470
Dimensions
- h1
- h2
- d
v
43,8
5,0
16,3
v
36,2
5,1
16,8
v
43,8
5,6
18,3
v
36,8
4,9
18,5
v
40,5
3,8
-
v
38,5
3,8
-
v
74,2
3,8
-
C-Mount Lenses Compact Series IR 400-1000nm
The Compact Series is optically corrected for the spectral range of 400 - 1000 nm. By using special glasses with anomalous partial dispersion, the image position for any wave length over the whole spectrum is essentially located on one plane. This optical correction in the near IR region is quite advantageous especially for application in image processing, where generally artificial light is used; this allows the IR cut-off filter to be removed from the camera which leads to a considerable increase of the energy reaching the sensor.
C-mount Lenses Compact.pdf (84 ko)
Optique Fujinon pour la vision industrielle
Lens
Extension
Tube
Magnification
Range
Working
Distance
(mm)
Object to
image
distance
(mm)
Object Size with
1/2" sensor
(mmxmm)
Object Size
with 2/3" sensor
(mmxmm)
Cinegon
1.4/8
none
- 1.7
- 0.0
- 56
x - 8.0x10.7
x - 11.0 x 14.7
Cinegon
1.4/12
none
- 2.5
- 12.3
- 75
x - 12.1x16.1
x - 12.1x16.1

Xenoplan
1.4/17
none
5 mm
8 mm
- 3.5
3.5 - 1.8
2.2 - 1.4
- 42.0
42.0 - 11.2
18.9 - 4.0
- 99
99 - 73
79 - 69
x - 16.8x22.5
16.8x22.5 - 8.4x11.3
10.6x14.4 - 6.5x8.6
x - 23.2x30.9
23.2x30.9 - 11.6x15.5
14.5x19.4 - 8.9x11.9
Xenoplan
1.4/23
none
5 mm
8 mm
10 mm
- 4.5
4.5 - 2.3
2.8 - 1.7
2.3 - 1.5
- 81.7
81.7 - 31.1
43.7 - 19.4
31.1 - 14.2
- 142
142 - 97
107 - 88
97 - 85
x - 21.6x 28.8
21.6x 28.8 - 10.8x14.4
13.5x18.0 - 8.3x11.1
10.8x14.4 - 7.2x9.6
x - 29.7x39.6
29.7x39.6 - 14.8x19.8
18.5x24.7 - 11.4x15.2
14.8x19.8 - 9.9x13.2
Xenoplan
1.4/35
none
5 mm
8 mm
10 mm
13 mm (8+5)
115 mm (10+5)
- 7.0
7.0 - 3.5
4.4 - 2.7
3.5 - 2.3
2.7 - 1.9
2.3 - 1.7
- 246
246 - 125
155 - 96.6
125 - 84.1
96.6 - 70.5
84.1 - 63.7
- 305
305 - 188
217 - 163
188 - 153
163 - 142
153 - 137
x - 33.6x 44.7
33.6x 44.7 - 16.8x22.3
21.0x28.0 - 12.9x17.2
16.8x22.3 - 11.2x14.9
12.9x17.2 - 9.3x12.4
11.2x14.9 - 8.4x11.2
x - 46.1x61.5
46.1x61.5 - 23.0x30.7
28.8x38.5 - 17.8x23.7
23.0x30.7 - 15.4x20.5
17.8x23.7 - 12.8x17.1
15.4x20.5 - 11.6x15.4
C-Mount Lenses 1" and 2/3" Standard
C-mount lenses of our standard series can be used for sensor sizes up to 2/3", some of them even up to 1" format. Two of the lenses have a very high relative aperture of 0.95 which results in excellent image quality even under low illumination conditions. Besides the fixed focal length lenses, two zoom lenses are available -- one of them also in motorized version. These lenses also offer:
- High-quality glass for maximum resolution.
- Reduced color aberrations due to use of ultra-low dispersion glass.
- Locking focus and iris settings on some models.


C-mount Lenses standard.pdf (92 ko)
Lens
1" standard
f-stop
range
Focusing
range
Magnification
range
Total length
from C-mount
Max.
diameter
Accessories
thread
Cinegon 1.8/10
1.8 ... 16
- 0.20 m
1: - 1:13
70 mm
57 mm
M55 x 0,75
Cinegon 1.4/16**
1.4 ... 16
- 0.30 m
1: - 1:14
65 mm
41 mm
M35,5 x 0,5
Xenon 0.95/25**
0.95 ... 11
- 0.30 m
1: - 1:10
45 mm
48 mm
M39 x 0,5
Xenoplan 1.9/25
1.9 ... 16
- 0.60 m
1: - 1:20
35.5 mm
40 mm
M30,5 x 0,5

** with fixing screws for iris and focus
Lens
2/3" standard
f-stop
range
Focusing
range
Magnification
range
Total length
from C-mount
Max.
diameter
Accessories
thread
Xenon 0.95/17**
0.95 ... 11
- 0.15 m
1: - 1:7
33 mm
41 mm
M35.5 x 0,5
Variogon
1.8/2.5-75
1.8 ... 16
- 0.50 m
1: - 1:36
1: - 1:6
136 mm
60 mm
M52 x 0,75
Variogon
1.8/10-100
1.8 ... 16
- 1.00 m
1: - 1:90
1: - 1:9
160 mm
80 mm
M77 x 0,75

** with fixing screws for iris and focus
Also available fully motorized with spot filter. Additionally with video signal controlled iris and/or potentiometers for focus and zoom
C-Mount Lenses 1/3" 3-CCD
These lenses have been specifically designed for use in three chip color c-mount cameras. This relatively new type of camera employs a prism that places added physical and optical constraints on the lens. The following lenses not only meet the strict criteria required for this format, but produce images of unparalleled quality as well. These lenses offer:
- High-quality glass for maximum resolution.
- Designed to cover 1/3" sensors.
- Reduced color aberrations due to use of ultra-low dispersion glass.
- Designed for use specifically with three Chip CCD Cameras.


C-mount Lenses
3-CCD.pdf
(92ko)
Lens
1/3" 3-CCD
f-stop
range
Focusing
range
Magnification
range
Total length
from C-mount
Max.
diameter
Accessories
thread
Cinegon 2.0/5.3
1.8 ... 22
- 0.07 m
1: - 1:3
72 mm
52 mm
M49 x 0,75
Cinegon 1.7/10
1.7 ... 22
- 0.10 m
1: - 1:2.5
45,5 mm
52 mm
M49 x 0,75

both lenses with fixing screw for iris
Accueil Alliance Vision | Nos Produits